Hot tubs are a luxurious addition to any home, offering relaxation and therapeutic benefits. However, a common concern among potential buyers and current owners is, "how clean are hot tubs?" The cleanliness of a hot tub depends largely on regular maintenance and proper cleaning practices. When maintained correctly, hot tubs can be very clean and safe, providing a pristine environment for enjoyment. This guide will explain how to keep your hot tub sparkling clean, ensuring it remains a hygienic and enjoyable part of your home.
The Importance of Clean Hot Tubs
Keeping your hot tub clean is essential for several reasons:
- Health and Safety: Proper cleaning prevents the growth of harmful bacteria and algae.
- Longevity: Regular maintenance extends the lifespan of your hot tub components.
- Enjoyment: Clean water enhances your overall hot tub experience.
Essential Tools and Equipment
Before diving into the cleaning process, gather the necessary tools:
- Electric sump pump or garden hose
- Wet-dry vacuum
- Towels or rags
- Hot tub cleaning spray
- Water treatment chemicals
- Hot tub plumbing cleaner
Step-by-Step Guide to Cleaning Your Hot Tub
1. Drain the Hot Tub
To start, fully drain your hot tub. Draining the water allows you to add fresh water and clean the shell thoroughly.
How to Drain Your Hot Tub:
- Unplug the hot tub or turn off the circuit breaker.
- Remove the drain plug and open the drain valve. Use a sump pump to speed up the process or let the water drain naturally. You can also attach a garden hose to facilitate easier drainage.
- Use a shop vac to remove any remaining water.
2. Clean the Filters
Remove the hot tub filters and spray them with a garden hose to remove debris. Soak the filters overnight in a diluted filter cleaning solution, repeating this process every three to four months.
3. Clean the Hot Tub Cover
Spray the hot tub cover with a cleaning solution and wipe it down with a rag or paper towel, focusing on creases and nooks where mildew can grow.
4. Clean the Shell
With the hot tub drained, spray the shell with a non-sudsing cleaning product and wipe it clean with paper towels or a cloth. Pay special attention to the jets, retainer rings, and filter case, avoiding direct contact with the control panel or electronic components. After cleaning, close the drain valve, replace the drain cap, and refill the spa.
Refill the Hot Tub:
- Place the fill hose into the tub, following the manufacturer’s recommendations to reduce airlock issues.
- Once filled, turn the power back on and heat the unit.
- Add water treatment chemicals when the water reaches 70 degrees Fahrenheit.
5. Clean the Plumbing
Cleaning the plumbing is crucial for removing bacterial biofilm that standard draining cannot reach.
How to Clean Your Hot Tub’s Plumbing:
- Add a plumbing cleaning product to the water 30 to 60 minutes before draining the hot tub.
- Allow the cleaner to circulate and use a wet-dry vacuum to remove brown foam and debris.
- When the foam turns white, the biofilm is gone, and you can proceed with draining the hot tub.
Shop for Hot Tubs at Watson’s
If you want the cleanest hot tub in the neighborhood, Watson’s has everything you need.
When you shop with us, you’ll find an amazing selection and personalized service, along with the guaranteed lowest prices in the USA. We have a wide variety of hot tubs from the leading brands along with tons of pool and spa supplies to make your spa stand out. Shop online or stop by your nearest Watson’s location today.
FAQ'S
1. How often should I clean my hot tub?
Regular maintenance is crucial for keeping your hot tub clean and safe. Here are some general guidelines:
- Daily/Weekly: Check the water's chemical balance and adjust as necessary. Remove any debris floating on the water's surface.
- Monthly: Clean the hot tub filters by rinsing them with a garden hose and soaking them in a filter cleaning solution.
- Quarterly: Drain and clean the entire hot tub, including the shell, cover, and plumbing, every three to four months.
- Annually: Perform a thorough inspection of the hot tub components and replace any worn-out parts.
2. What are the signs that my hot tub needs cleaning?
Several indicators can signal that your hot tub needs cleaning:
- Cloudy Water: If the water becomes murky or cloudy, it’s a sign that the chemical balance is off or there is a buildup of contaminants.
- Unpleasant Odors: A foul smell emanating from the water can indicate the presence of bacteria or algae.
- Foam or Scum: The appearance of foam or scum on the water’s surface suggests a buildup of oils, lotions, or other contaminants.
- Slippery Surfaces: If the shell or steps of the hot tub feel slimy or slippery, it’s time for a thorough cleaning.
- Reduced Water Flow: Blocked or dirty filters can cause a decrease in water circulation, indicating the need for filter cleaning or replacement.